Fiber Optic Fusion Splicer

  • Japan Original welding machine FSM-80S fusion splicer FSM80S
Japan Original welding machine FSM-80S fusion splicer FSM80S

Japan Original welding machine FSM-80S fusion splicer FSM80S

  • Model Number: FSM-80s
  • Splicing Time: 8 seconds
  • Electrode Lifetime: > 4000 times, replaceable
  • Mode: ZQQ
  • Product description: Japan Original welding machine FSM-80S fusion splicer FSM80S

Fujikura FSM-80s Fiber Optic Fusion Splicer


1.Color LCD monitor & 256 magnification

2.Compact & Light weight

3.Reversible monitor with control panel on each side

4.Max. wind velocity of 15m/s.

5.8 Sec. splice time, 40 Sec. tube-heat time

6.Simultaneous X and Y views

7.Large capacity internal battery

8.SYSTEM TEST ensures the best working condition

9.User programmable

10.Auto check fiber end face

11.Auto calibrate parameters

12.Auto calibrate parameters

13.Multiple language options

Model FSM-80C Fusion Splicer
Applicable Fibers Single-mode (G.652 & G.657), Multimode (G.651), DS (G.653), NZDS (G.655)
Fiber Count Single, 2, 4, 5, 6, 8, 10, 12
Cladding Diameter 125 μm
Coating Diameter Ribbon: 0.25 mm to 0.4 mm, Single: 250 μm and 900 μm
Fiber Cleave Length 10 mm
Typical Average Splice Loss 0.05 dB with SM, 0.02 dB with MM, 0.08 dB with DS, 0.08 dB with NZDS;measured by cut-back method relevant to ITU-T standards
Splicing Time Typical 15 seconds with standard single-mode fiber
Arc Calibration Method Automatic, real-time by using results of previous splice when in AUTO mode; manual arc calibration function available
Splicing Modes 100 preset and user programmable modes
Splice Loss Estimate Based upon dual camera cladding alignment data
Storage of Splice Result Last 2000 splice results stored in the internal memory
Fiber Display X or Y, or both X and Y simultaneously; front or rear monitor display options with automatic image orientation
Magnification 35X to 90X
Viewing Method Dual cameras with 4.7 inch TFT color LCD monitor with anti-reflective coating
Operating Condition 0 to 3,660 m above sea level, 0 to 95% RH, and -10 to 50°C respectively
Mechanical Proof Test 1.96 to 2.25 N
Tube Heater Built-in tube heater with 30 heating modes; auto-start function
Tube Heating Time Typical 40 seconds with FP-5 sleeve, 17 seconds with FP3 (40), 5-15 seconds with Fujikura micro sleeves
Protection Sleeve Length 60 mm, 40 mm, Micro
Splice/Heat Cycles with Battery Typical 110 cycles with power save functions activated
Electrode Life 1,500 Arc Discharges
Power Supply Auto voltage selection from 100 to 240V AC or 10 to 15V DC with ADC-18, 14.8V DC with BTR-09 battery
Terminals USB 2.0 (USB-B type) for PC communication and Mini-DIN (6-pin) for HJS-02/03
Wind Protection Maximum wind velocity of 15m/s (34 mph)
Dimensions 146 W x 159 D x 150 H (mm) / 5.7 W x 6.3 D x 5.9 H (inches)
Weight 2.3 kg (5.1 lbs) with AC adapter; 2.5 kg (5.5 lbs) with battery