Detailed parameters:
Model AFI400
Wavelength response range 750nm-1700nm
Insertion loss: 1. 250um bare fiber
2. 900um tight casing fiber
3. 3mm diameter fiber
Application of fiber <3mm all kinds of fiber / <3mm optical fiber
Identification of modulation signal 270Hz/1KHz/2KHz
Optical fiber direction recognition
Power measurement
Display mode LED digital display
Hint
Low power monitoring
Detector type 1mm InGaAs
Test conditions for minimum detection power data
1. 250um bare fiber 2. 900um tight casing fiber
3. 3mm diameter fiber
Data test conditions
4. 250um bare fiber 5. 900um tight casing fiber
6. 3mm diameter fiber
1550nm
1. -35dBm 2. -35dBm 3. -30dBm
1310nm
4. -30dBm 5. -30dBm 6. -27dBm
We use Corelle SM standard optical fiber and 250um bare fiber to get red, yellow, orange, blue, green and brown coated bare fibers. The parameters take the average value of various color coating layers, and 900um and 3mm take white and yellow standard jumpers. If the bare fiber coating layer is black, the light attenuation is very large or can not be measured.
AFI420-S output power >1mW line attenuation hours, you can see red laser at 5KM, AFI420-L output power >10mW line attenuation hours, you can see red laser at 10KM.
Contact: Robin
Phone: 86-18256084750
Tel: 86-18256084750
Email: hfxcservice@163.com, https://www.hfxcfibertools.com
Add: Plant 5, Crossing Of Weiwu Road And Fengxia Road, Shuangfeng Ind. Zone, Changfeng